|
|
|
New Product now available We have now introduced a range of arches, with arch brick slips cut and fixed onto a precast re-inforced lintel, purpose made to your own arch sizes. The first two off the drawing board and into the workshop are the 215mm high Flat Arch as illustrated below and the Bullseye, with more to follow. No Catnic lintel needed, no support formers, and no special rate bricklayers. Bed course bricks can be cut and supplied for Flat Arches. All precast arches are ready to bed in place with on site pointing up to match the body brickwork. |
FLAT ARCH
The Flat Arch lintel illustrated, is 215mm high x 915 long. It is faced with 25mm slips with a skewback of 60 degrees. Overall thickness is 100mm, with concrete backing reinforced to provide structural integrity of the Arch. Other skewback angles available at the same cost. - Specimen prices
| Span | Height | Skewback | Cost ex Works |
|---|---|---|---|
BULLSEYE
The Bullseye illustrated, is 605mm diameter. It is faced with 25mm slips, overall thickness is 100mm, with concrete backing reinforced again providing structural integrity of the Arch. - Specimen prices
| Internal Diameter | Cost ex Works |
|---|---|
A Quality Assured, fast turn round service, and a Computerised Arch package for fast and accurate Arch Production.
Visit us by E-Mail: sales@brickcutting.net
We also have a factory at Wrexham - they are good too, ring 0044 (0)1978 760600
