Wrexham Brick Cutting Ltd

Welcome - and

Brick Cutting

Home Page
Brick Cutting
Arch Bricks

Arch Types
Flat Arches
Flat U/cambered
Three Centred
Gothic Arches
2 Centred Gothic
4 Centred Gothic

Contact Us

The Brick and Arch cutting specialists


Arch type Bullseye
Please specify all dimensions in millimeters

For all arch types, it is necessary to specify the Stock Brick size by Length, breadth, and thickness, in order that we can determine how much brick there is to cut from. Also specify the mortar bed thickness. If very fine joints are required, then please specify if joggles are needed although this last item is only needed for cutting, - where we are providing calculations and drawings only, this is not necessary.

Inside Diameter of Bullseye.

From an appearance point of view, a bullseye may have the number of voussoirs divisible by 2 or 4. Divisible by two gives a headstone at the top centre and at 6 o'clock, and divisible by four gives a voussoir centred at the head, 6 o'clock, 3 o'clock an at 9 o'clock, so you need to specify this. Equally, bullseyes may have one or more keystones, so in which case you need to specify the keystone number, positions, soffit width, and projection below the intrados.

A Quality Assured, fast turn round service and a Computer Arch package
for fast and accurate Arch Production.
Wrexham Brick Cutting Ltd
Llay Hall, Cefn-y-Bedd, Wrexham, Clwyd, LL12 9YG, Wales
Tel: 01978 760600 or Fax: 01543 425946
Top of Page
Last updated: November 7th, 2020.
Published by:  Lichfield Web Design